Tag Archives: Winterthur

WIA Class on Inlay

The purpose of my Woodworking in America session on inlay, “Understanding Inlay: A Key Piece in Connoisseurship & Identification” wasn’t to provide rules of thumb to discover the orientation of antique furniture – the idea was to give a few general guidelines that A1_New York Card Tablewould help identify from where a particular antique piece of furniture may have been built. We focused on card tables from the Federal period due to the fact that each major city built card tables from the simplest designs to the most intricate, heavily-inlaid tables. I emphasized throughout the class that the information presented should be grouped with other gathered information so one could draw a conclusion. That stated again, I’ll pass along a few of my comments.

The first and easiest way to identify a card tables point of origin has nothing to do with the inlay, although you could also establish the same origin if you studied the banding and pictorial inlays on the table. Here, however, construction techniques are a dead give-away. The table pictured above is from New York. We know this because of the fifth leg. In almost all cases, if you have a fifth leg, you are looking at a card table built in New York.

ACD_Dunton_NH TableLet’s get back to inlay. The most fascinating of inlay banding, at least to me, is what is known as lunette inlay. There was a time in our furniture study that whenever this inlay was found on a piece of period furniture, that piece was immediately associated with the father and son team of John and Thomas Seymour. Later, a similar inlay was found on other signed furniture not built by the Seymours. That caused dealers and collectors to question the attribution of the Seymour work. The table shown above is a signed piece built in New Hampshire, and not a card table built by a Seymour.

ACC_Bradlys Seymour SimpleAs a woodworker, I wonder how this inlay was made in the period. (The left-hand photo is a close-up look at lunette inlay.) Was it laid up in a pack then sliced as was other inlay? Some woodworker think so. Or was it laid up a stick at a time? There is a camp of today’s woodworkers who think that was how it was done in the late 1700s. Regardless of how you may think it was made, it is a great piece of work and worthy of the amount of study it has received.

DE_Eagle PateraAnother area that I find interesting is to look at the use of eagles in pictorial inlay. The image at the right is a grouping of eagle patera  I pulled together from “American Furniture The Federal Period” by Charles F. Montgomery. (I highly recommend this Winterthur book if you are at all interested in inlay.) If you study the eagles, you’ll notice a few interesting things. First of all, Connecticut inlay – not just the eagles, but most of the inlay work found in this area – is very artistic and quite different from work found elsewhere. Pinpointing period work from the Connecticut River Valley and from Connecticut is rather simple.

Of the remaining eagles, take a close look at the inlay from New York. Notice how lifelike the eagle appears. This eagle looks bold, strong and very patriotic. The Federal period in which we’re looking is right after the Revolutionary war when New York was the nation’s capital, until 1791 when it was moved to Philadelphia before moving to Washington DC. Patriotism had to be extremely strong at the time. Was this strength reflected in the inlay produced at the time?

DEA_Bradlys_Eagle on ClockOne last thought on eagle inlay: If you study the eagles shown in Pennsylvania, Maryland and the South, you’ll see that each of the eagles have something in the mouth, a streaming banner. This could be a telltale of furniture from these areas. Shown at the right is a door from an antique clock. The clock is known to be from Pennsylvania. And the eagle has the banner held in its mouth.

This is just a taste of the what can be discovered when studying inlay. Over the next couple of months, I’ll present another post on what I’ve discovered about inlay. If you have some interesting information to share, please do so in the comment section below.

Build Something Great!

Glen

 

3 Comments

Filed under Antique Pieces, Design, Inlay

Gorgeous Gams & Other 2013 Classes

I expect to have a busy 2013, so I limited my teaching weeks and weekends this year. Scheduled are only two classes that are week long, and one weekend class that begins on Friday. (Guess that would be a three day class.)

LegOnce again, Bob Van Dyke has invited me back to teach at his Connecticut Valley School of Woodworking (CVSW). April 5th through the 7th is Gorgeous Gams & Foot Fetishes: Its all about the Legs and the Feet- A 3 day weekend of fun and inspiration with Glen Huey. (Click here, then scroll about 2/3 down the page for additional class information.)

There is a lot to cover over the three days. Did you know you can get very accurate patterns from photos?  During the class we’ll rip leg and feet from actual furniture photos then learn how to develop those into full-size patterns. I’ll also show you how to shape cabriole legs. Where to start and what tools make the task easy and repeatable – we do want our four legs to match, right? After you get a leg shaped, it’s on to tapered legs. You may think you have a handle on tapered legs, but I’ll fill in a few blanks on what legs fit with what periods and I’ll demonstrate a couple techniques that are sure to add to your knowledge and abilities. And of course, we cannot bypass feet. An in-depth study of bracket and ogee-bracket feet is sure to bring discussion. Contact CVSW to register for the class.

SAMSUNGLater in April (April 29 through May 3), I show up at Chuck Bender’s Acanthus Workshops to teach the first week long class. Since Acanthus is in Chester County Pennsylvania, what better project could you build than a small chest that’s big with line & berry inlay. (A chest, by the way, that is featured in the June 2013 issue of Popular Woodworking Magazine, in case you get closed out of the class.) This chest, attributed to Moses Pyle and built for Hannah Darlington, is part of the collection at Winterthur Museum. Not only do you build this chest during the week, but you may get a chance to see the original in a day trip to the museum. If line & berry inlay is your weakness, this is the class to take. Construction is not over the top, so we’re sure to finish the project. (That will make the spouse happy, huh?) During the class we’ll use both power tools and hand tools to inlay the piece. (Acanthus has been plagued by website difficulties over the past few weeks. If the class listing cannot be found, give Chuck a couple days to get things corrected and posted.)

CT LowboyRounding out the year, except for Woodworking in America in October, I return to CVSW to instruct a class building a Connecticut Lowboy. This piece, discovered in a backroom tour of the Connecticut Historical Society, stopped both Bob and I in our tracks. I immediately said that this would be a great class. Great minds think alike. Bob added the class to his summer schedule. The class runs from September 3rd through the 8th.

If you are a study of period furniture designs, you see that this lowboy is a transitional piece – originating as we moved from the William & Mary style into Queen Anne period. I especially like the high arched aprons and the molded profile around the drawers. Also, there is a very interesting building technique used on the inside of this piece.

(Might I suggest a “twofor” at CVSW. Sign up for the legs class then return to build a great lowboy. Contact the school for more information.)

If you would like additional information on these classes, please contact me or the schools directly.

Build Something Great!
Glen

2 Comments

Filed under Antique Pieces, Design