Tag Archives: ebonize

Shaker Counter Top

This is a photo of one of the two known Shaker counters on which I based my counter in the June 2012 issue of Popular Woodworking Magazine. As I looked at the photo, I concluded that it surely wasn’t a maple top as was the balance of the counter. No, this top looked more cherry-like in color.

With that determination, I built my top out of cherry. I finished the counter carcase using a mixture of half golden amber maple dye and half brown walnut dye – a mixture I use quite often since I tired of a straight golden amber maple color. The top I finished with my favorite dye for cherry, dark antique Sheraton which is actually a mahogany color in the Moser’s line of aniline dye. (I use Moser’s dye almost all the time.)

When the two parts were complete, and the top married with the base, I felt ill. The combination was so far from what I saw in my mind’s eye, I wondered if I needed stronger glasses. It would not work. I had to change the top’s color or wood. I chose color because it was much more work to change the wood. Or so I thought.

Samples closet to the bottles includes the India ink. I think coverage is better as is the color – less blue, more black. (With Moser's ebony out of stock in my finish cabinet, I turned to Transtint.)

First thing to do was to strip the top of its dark antique Sheraton dye. Pull out my #80 scraper and get busy. To my surprise, the top was clean in a short time, but I had to completely sand the surface a second time. With that complete, what would be the best look for the top. I looked again at the antique counter and began to see the top as if it may be ebonized. My top was cherry, and cherry is one of the better choices when ebonizing. Sounded like a plan.

I knew that using only ebony aniline dye would leave my top with a bluish cast. That’s not good. I went back and again read Brian Boggs’ article on ebonizing a finish (June 2009), but that procedure, even though the results are extremely nice, is too involved for my liking. I needed something easier.

I thought back to when contributing editor, Christopher Schwarz built one of his many benches and needed to fill in some larger cracks in his top. He used a two-part epoxy colored with India ink. Why not mix some ink in with my dye to see if I could move from blue to black.

I decided to use one part ink with 10 parts dye – I figured a 10% solution would be good to start. I didn’t want to simply ink the top. My results were, at least to my eye, better than the dye itself. One coat on the cherry added a great deal of color, but still allowed the cherry grain – and the slight reddish hue – to show through. I am very satisfied with the finished appearance of my top, and equally happy with the combination of the ebonized top perched on the “popping” tiger maple. Take a look for yourself – pick up a copy of the magazine.

Build Something Great!


1 Comment

Filed under Design, Finish Techniques, Shaker